Manual Revision: 04/17/2013For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7RS-422 (Transmitter buer is always enabled)NOTE: CB1S485 supports 4-wire RS-422 mode, which requires cross-over twisted pair cable

Instruction Manual8SpecicationsRegulatory Certications ROHS, FCC, CEBus Type 32-bit CardBus Type-II SlotConnectors 1x DB9 Male ConnectorMaximum Data

Instruction Manual9Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-le

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital dev

Instruction ManualiTable of ContentsIntroduction ...1Packagin

Instruction Manual1IntroductionPackaging Contents• 1x Serial PCMCIA Card • 1x Breakout Cable • 1x Driver CD • 1x Instruction ManualSystem Requirem

Instruction Manual2Hardware GuideUART Input Clock Speed SelectorRS-422/485 Mode SelectorSwitch NameSwitch PositionsClock SpeedHSPD(Up)UART Input Clock

Instruction Manual3Terminator SettingsDB9 Connector PinoutTerminator Enable/ Disable SwitchesSwitch NameJumper PositionsMode and Termination Resistor

Instruction Manual4InstallationWARNING! It is advisable to remove all possible static discharge potential from any objects that the ExpressCard may co

Instruction Manual5RS-485 2-wire modeTo enable CB1S485 to operate in RS-485 2-wire mode:1. Right-click on My Computer. If you are using Windows 98/ME

Instruction Manual62. Right-click on My Computer and select Manage.3. Choose Device Manager and double-click on Ports.4. You will notice the added