Startechcom PCI4S9503V Manual do Utilizador

3.3 Volt/5 Volt Buffered High Speed SerialPCI CardPCI4S9503VPCI8S9503VInstruction GuideThe Professionals’ Source For Hard-to-Find Computer PartsSERIAL

8SCO OpenServer1. Log in as a super-user (SU) or root.2. Extract all the files on the diskette using the tar command:# cd /# tar xvf /dev/fd0135ds183.

9Technical SpecificationsConnectors DB 37-pin (female) Expansion Cable 37-pin (male) & 9-pin (male)Serial Interface RS-232Bus Interface 32-bit uni

10Technical SupportThe following technical resources are available for this StarTech.com product:On-line help:We are constantly adding new information

Revised: January 7, 2004

FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FC

1Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2In

2IntroductionThank you for purchasing a 3.3 volt/5 volt buffered high-speed serial card fromStarTech.com. Compatible with both 3.3 or 5 volt motherboa

3InstallationNote: In one system, you can install two of these serial cards. You must differentiatebetween the two cards by using the jumper (located

4Driver InstallationNote: Depending on your operating system and the configuration of your system, theinstructions below may not be identical to what

5Windows Me/98/95Once you turn your computer on after installing the card, Windows will automaticallydetect the new hardware. Follow the onscreen prom

6DOSWhen installing multiple cards in DOS, it is important to install the card designated cardNumber 1 (with the jumper ON) first.1. Change your activ

7LINUX1. Login as super-user (SU) or root.2. Change your directory to root and copy the driver diskette to the system:# cd /# tar xvf /dev/fd03. Chang